Which machinery is used for hardware parts processing?

Hardware parts processing is more and more, in many machinery, many processing manufacturers can be used more, similar to cranes, or forklifts, or cranes and the like, or some gold locks in life and the like, keys , These parts of locomotive maintenance can be applied. This is one point. Now the specifications of hardware processing and processing materials are different, and the processing size is also different according to the needs of customers.

Hardware processing, what are the hardware processing accessories?

1. When designing the structure and shape of the CNC turned parts, the metal stamping parts should adopt complex and reasonable structures and their combinations, and at the same time, the number of machined surfaces and the processing area should be as small as possible.

2. Select a reasonable method of blank preparation in machine manufacturing, which can be indirectly applied to profiles, casting, forging, stamping and welding. The selection of the blank is related to the specific production technical conditions, and generally depends on the production batch, material performance and processing capability.

3. For the requirements of metal stamping and forming functions, in order to facilitate the improvement of stamping deformation and the quality of parts, the material should have good plasticity, small yield-strength ratio, large plate thickness directional coefficient, small plate three-dimensional directional coefficient, and material compliance. The ratio of strength to elastic modulus is small. The separation process does not require the material to have great plasticity, but a material with certain plasticity.

4. Rules for proper manufacturing precision and surface roughness. The cost of metal stamping parts will increase with the improvement of precision, especially in the case of high precision, this increase is extremely obvious. Therefore, high precision should not be pursued when there is no sufficient basis. Similarly, the surface roughness of metal stamping parts should also be adjusted according to the actual needs of the surface.